1 / 5
Options:
Model No. : | CW-JL-Z3 |
---|---|
Specification : | CW-JL-Z3/384.8 * 249.8 * 129 PC operating version (APP) |
Yangjiang, Guangdong, China
Ürün Açıklaması
Product Name |
Charging Post Z3 7kw light guide column section |
Model |
CW-JL-Z3 |
Specification |
CW-JL-Z3/384.8 * 249.8 * 129 PC operating version (APP) |
Charging mode |
Two-dimensional code scanning charge |
Means of communication |
Either 4G or GPRS |
The length of the gun line |
5M (optional non-standard length) |
human–computer interaction |
RGB light strip |
Rated Voltage |
Single-phase three-wire 220VAC |
Rated power |
7KW(220VAC) |
Working Frequency |
45~65Hz |
Max. Rated Current |
32A |
Operating Temp |
.-40℃—+50C |
Protection Class |
IP65 |
Number Of Jacks |
New national standard 7 holes |
General Standard |
GB/T 18487.1-2015,GB/T34657.1-2017; |
Protection function |
Under-voltage, over-voltage, over-current, over-heat, short circuit, leakage, full automatic stop, ungrounded protection |
Warranty |
One-year replacement, three-year warranty, lifetime maintenance |
Precautions |
1, when installed in open-air places, it is recommended to be equipped with electrical boxes. 2. Make sure the ambient temperature is between -20 ° C and + 50 ° C. Keep away from open fires or baked goods and avoid high temperatures. 3. There should be no strong vibration, inflammable and explosive materials near the installation site, and good ventilation. Shall not be placed in corrosive, corrosive or humid air. Adequate space for cooling and ventilation must be reserved. 4. The installation shall not be located in low-lying areas or in areas prone to water accumulation. The installation site shall not be higher than 2000m above sea level. 5, bracket installation without wall support, it is recommended to use wall-mounted installation, if the use of floor-mounted bracket, fixed installation. Pile installation, should ensure that the pile vertical, and avoid vehicles may pass the route. |
2. Şarj tabancasını elektrikli aracın şarj portuna bağlayın, gösterge ışığı her zaman mavidir, başarılı bağlantıyı gösterir. Uygulamayı kullanarak 、 Alipay 、 wechat , Şarj yazısındaki şarj QR kodunu tarayın, işlem adımlarını takip edin. Uygulama tarafından şarj olmaya başlaması istenen gösterge ışığı yeşil yanıp söner, normal şarjı gösterir.
3. Şarj Sonu : Uygulamada "Şarj Etmeyi Durdur" u tıklayın veya şarj etmeyi durdurmak için tabancadaki düğmeye basın. Şarj tabancasını araç konnektöründen çıkarın ve şarj duraklarını tekrar yerine koyun.
Yangjiang, Guangdong, China
Sorgunuzu bu tedarikçiye gönderin